Cemetery Fence

Materials/Tools :

(4) 1/2 inch 10' pvc.

(2) 1'x2'x8' stud.

(2) black spray paint.

5/8 in drill bit

1 inch screws

First, cut 12 sections of pvc at 32 inches long.

Drill a 5/8 inch hole every 8 inches on both of the beams.

Push the sections on pvc into the holes on the wood. Leave them about 6 inches from each end.

Screw the pipes into place using 1 inch screws, or you can put a little glue on the pipe right before it goes into to hole.

And finally, spray paint the whole fence black and your done!